Pulse – Sensor Diagnostics

In this article, we’ll go over how to access the Sensor Diagnostics and what information it’ll provide.

Step 1) Using the Up & Down arrows, select Sensors and press the SEL button.

Step 2) Using the Up & Down arrows, select DIAGNOSTICS and press the SEL button.

Step 3) Once within the Diagnostics section, use the Up & Down arrows to highlight a vehicle (A, B, C, D & E).

Step 4) There are 3 pages of data within the Diagnostics. Each page has its own specific data. (listed below). Press the SEL button to go to the next page.

Page 1:
SER NO – Serial Number for the Pulse Monitor.
POSITION – Sensor position on vehicle
LAST RX – Last transmission from a sensor
RF LVL – RF Streight in dB

Page 2:
PRESSURE – Current pressure of the sensor.
REF PRESSURE – Reference Pressure of the sensor.
TEMP – Current temp of the sensor.
ALARMS – Current alarms for the sensor

Page 3:
DIAG PKTS – Number of Diagnostic Packets received