Pulse – How to Update Reference Pressure

In this article we’ll go over how to update the Reference Pressure within the Pulse Monitor.

Step 1) Using the Up and Down arrows, navigate to Vehicle Settings option and press SEL button.

Step 2) Using the Up and Down arrows, navigate to Ref Pressure option and press SEL button.

Step 3) Once in the Ref Pressure, you’ll see options to change the Axle Ref Pressure & Veh Ref Pressure. The Axle Ref Pressure will allow you to change the Reference Pressure of the axles per vehicle. The Veh Ref Pressure will allow you to change the Reference Pressure per vehicle.

Step 4) Using the Up and Down arrows, navigate to the desired setting. Press the SEL button

Step 5) If you have multiple vehicles enabled, use the Up and Down arrows to highlight the desired vehicle (A,B,C,D, or E) & press the SEL button.

Step 6) Use the Up and Down arrows to adjust the setting parameters to your desired value. Press SEL to save.