Pulse – How to Adjust Alert Settings

This article will guide you through the process of adjusting the Alert Settings within the Pulse.

Step 1) Using the Up and Down arrows, navigate to Vehicle Settings option and press SEL button.

Step 2) Using the Up and Down arrows, navigate to Alert Settings option and press SEL button.

Step 3) Once in the Alert Settings, you’ll see options to change the following settings Low Pressure, High Pressure, Across Axle %, High Temp, and Leak Detection.

Step 4) Using the Up and Down arrows, navigate to the Alert Settings you wish to change. Press the SEL button

Step 5) If you have multiple vehicles enabled, use the Up and Down arrows to highlight the desired vehicle (A,B,C,D, or E) & press the SEL button.

Step 6) Use the Up and Down arrows to adjust the setting parameters to your desired value. Press SEL to save.