Pulse – How To Change Sensor Timeout

This article will guide you through the process changing the duration of which the Sensors time out.

Step 1) Using the Up & Down arrows, select Vehicle Settings

Step 2) Using the Up & Down arrows, select Advanced

Step 3) Using the Up & Down arrows, select Sensor Timeout

Step 4) Using the Up & Down arrows, highlight a vehicle (A,B,C,D,E). Press the SEL button to confirm vehicle selection.

Please note: Only enabled vehicles will appear for selection. To enable additional vehicles, follow the steps in Pulse – How to Enable / Disable Vehicles.

Step 5) Using the Up & Down arrows, set the value to the desired value. (Default 15 Minutes)

Step 6) Press the SEL button to save. Use the MENU button to back out of the Menus.