Pulse – How to Delete Sensors

In this article we’ll be going over the steps of deleting a sensor on an existing vehicle. Please Note: Remove existing sensor from tire valve stem prior to starting.

Step 1) Using the Up and Down arrows, navigate to Sensor and press SEL button.

Step 2) Using the Up and Down arrows, navigate to Delete Sensor and press SEL button.

Step 3) Using the Up and Down arrows to highlight the desired vehicle (A,B,C,D, or E) & press the SEL button.

Please note: Only enabled vehicles will appear for selection. To enable additional vehicles, follow the steps in Pulse – How to Enable / Disable Vehicles.

Step 4) Using the Up and Down arrows, navigate to the tire location you want to delete the sensor. Press SEL button.

Step 5) Using the SEL button, confirm the deletion of the sensor. The sensor is now deleted.

Step 6) Repeat Steps 4 & 5 if you need to delete multiple sensors. Please note: There is no save option after step 5. Use the Menu button to back out to the Normal Viewing mode.